Triumph TR6 Fuse box Repair
Rebuilding fuse box tool list punch, flat center punch vise small hammer dremel & wire brush soldering equip - flux, solder, small iron steps: disconnect battery - negative wire photograph box or mark wires remove box - lower screw use 1/4 wrench and screwdriver bit Flat punch in vise and center punch rivet, flat side down - clip on punch set rivet with ctr punch and hammer clean with wire brush flux solder spray with contact cleaner replace reconnect test New rivets?
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
 |
 |
 |
 |
 |
 |
 |
 |